Crest Audio X-VCA Manuel d'utilisateur télécharger pdf (Page 63)

4

p. 63

left / right & mono master modules

Output EQ features

Independent stereo and mono output EQ sections are provided on X-VCA.The EQ

consists of 5 bands and a fixed High pass filter.The High and Low bands are shelving

EQ and the High Mid, Mid and Low mid are full parametric.Although the left and right

signals are processed separately, the paramaters are set in tandem by common front panel

controls.

high frequency—HF (shelving eq)

Boost / Cut (inner knob)15dB boost and cut.

Frequency (outer knob) Continuously sweepable between 1kHz and 20kHz

high mid—HM

Bandwidth A Q range of 3.0 to 0.7 (0.5 octave to 2.0 octave) is available.

Boost / Cut (inner knob)15dB boost and cut.

Frequency (outer knob) Continuously sweepable between 400 Hz and 8 kHz.

mid—MID

Bandwidth A Q range of 3.0 to 0.7 (0.5 octave to 2.0 octave) is available.

Boost / Cut (inner knob)15dB boost and cut.

Frequency (outer knob) Continuously sweepable between 200 Hz and 4 kHz.

Low mid—LM

Bandwidth A Q range of 3.0 to 0.7 (0.5 octave to 2.0 octave) is available.

Boost / Cut (inner knob)15dB boost and cut.

Frequency (outer knob) Continuously sweepable between 60 Hz and 1.2 kHz.

Low frequency—LF (shelving eq)

Bandwidth A Q range of 3.0 to 0.7 (0.5 octave to 2.0 octave) is available.

Turning the control full clockwise switches operation to a plus/minus shelving mode.

Boost / Cut (inner knob)15dB boost and cut.

Frequency (outer knob) Continuously sweepable between 40 Hz and 800

kHz.

eq on

Equalizer is on. This switch is used to activate the EQ section and can be used

to make A/B comparisons between "flat" and eq'd signals.

high-pass filter—HPF

The high pass filter HPF has a fixed cut off frequency of 40Hz and a 24dB per octave

slope.

HPF

High-pass filter is on.

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 141 142

Commentaires sur ces manuels

Pas de commentaire