Crest Audio X-VCA Manuel d'utilisateur télécharger pdf (Page 75)

p. 75

master control section

external stereo program input

The external stereo program input allows a line level stereo source to be fed into

the console, eq'd and routed to the Left/Right and mono busses.The stereo

source can also be monitored through the solo system.This section can be used

for stereo returns or for stereo playback through the mains.

external stereo program input eq

The stereo source passes through a basic eq section.The eq controls affect both

the left and right signals together.

HF EQ

15db boost or cut at 12kHz with shelving characteristics

LF EQ

15db boost or cut at 80Hz with shelving characteristics

program level control

Adjusts the level of the external stereo program input signal.

mono assignment switch

The post-level pot external stereo program signals are summed together as

a mono signal and are assigned to the mono mix buss with this switch.

L-R assignment switch

The post-level pot external stereo program signals are assigned to the left

and right mix busses with this switch.

peak/signal bi-color LED indicator

This bi-color LED indicates both peak and signal present conditions. External

program input levels within 3dB of overload will cause the RED peak LED to illu-

minate. (If this should occur beyond an occasional flicker, the external input level

should be reduced.) Green illumination of the LED indicates signal is present, and

it varies in brightness in response to varying signal levels.

external program Solo switch

See section on Solo features for more information.

LED

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 141 142

Pas de commentaire

Crest Audio X-VCA Manuel d'utilisateur Page 75